Categories
Latest Products
It is ready to pass furnace with an optional 80 mm diameter alumina processing tube. This high-temperature vertical tube furnace is using MoSi2 as heating elements. It is designed for the heat treatment of all types of new materials under vacuum or other gas conditions up to 1600℃. The temperature of the tubing furnace is controlled by a high-precision SCR power controller with accuracy +/-1 ℃ and 30 segments programmable up to 1600℃ .
Introduction:
It is ready to pass furnace with an optional 80 mm diameter alumina processing tube. This high-temperature vertical tube furnace is using MoSi2 as heating elements. It is designed for the heat treatment of all types of new materials under vacuum or other gas conditions up to 1600℃. The temperature of the tubing furnace is controlled by a high-precision SCR power controller with accuracy +/-1 ℃ and 30 segments programmable up to 1600℃ .
Main Feature:
Technical Parameter:
Structure | Vertical Type |
Display | LED |
Power | 4 KW |
Voltage | AC 220V-240v Single Phase, 50Hz
(or according to your requirement) |
Max. Temperature | 1600o℃ for short time |
Continuous Temperature | <=1500o℃ |
Max. Heating Rate | suggestion 10℃ /min |
Temperature Control Accuracy | ± 1 ℃ |
Heating Zone Length | 300mm |
Heating Elements | MoSi2 heater |
Tube Size | OD 80mm x L 1000mm |
Tube Material | Alumina Tube |
Tube Block | Two fibrous ceramic blocks are included for blocking heat radiation from inside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating). |
Temperature Control | PID automatic control via SCR power control |
Heating curves | 30 steps programmable |
Chamber material | Alumina Fiber |
Warranty | One year limited warranty (Consumable parts such as heating elements and alumina tube are not covered by the warranty) |
Note: Different Tube Sizes and temperature are available based on your requirement, pls contact us freely if there is any specific requirement.