Categories
Latest Products
Brief Introduction:
It’s mainly used for the preparation of rare earth, electronic lighting, crystal annealing, bio ceramics, electronic ceramics, special alloys, magnetic materials, precision casting, metal heat treatment and other industrial vacuum sintering, protective atmosphere sintering, vacuum deposition, CVD experiments, material composition measurement occasions.
Technical Parameter:
Display | LED |
Rated Voltage | Single Phase, 208-240 VAC, 50 Hz Power cord is included (without plug) |
Power Consumption | Max. approx. 4KW (Final power depends on our final design) |
Heating Zone | 200+200mm two zones
Each zone with separate temperature controllers |
Working Temperature | Max temperature: 1200°C ( for limiting)
Continuous working temperature: ≤1100°C Heating rate: Max 20°C/min, Suggested ≤10°C/min |
Temperature Control
|
Digital controllers with PID and 30 segments programmable
PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. Over temperature protection and alarm allows for operation without attendant. |
Control Accuracy | +/- 1°C |
Thermocouple | N-type thermocouples |
Vacuum
and Gas Sealing & Flange |
Stainless Steel Vacuum Flange |
Heating Element | Resistance Wire with Mo |
Chamber Material | Alumina Fiber |
Furnace Tube | Tube Material: quartz tube
Tube Size: OD60mm |
Warranty | One year warranty (Consumable parts like heating element is not included) |
Note: Different Tube Sizes and temperature are available based on your requirement, pls contact us freely if there is any specific requirement.