Categories
Latest Products
Fast Zirconia Sintering Furnace
The bottom loading dental zirconia sintering furnace is mainly used for the sintering of zirconia materials and also can be used in the field of powder metallurgical for the high temperature sintering and annealing of the materials.
INTRODUCTION:
The bottom loading dental zirconia sintering furnace is mainly used for the sintering of zirconia materials and also can be used in the field of powder metallurgical for the high temperature sintering and annealing of the materials.
FEATURE:
Simple english touch screen control panel
Various programmed curve setting available
ELECTRIC POWERD
Operation range 100-120V50/60HZ 230V 5060HZ
Electric current 23ampere@110V 10ampere@230V
Power: max 2500w
POWER UNIT
Voltage controller. The service life of the silicon elemais effectively prolonged.
VOICE PROMPT
Each stage has voice prompt. Program selection prompt to prevent using wrong program.
SPECIFICATION
1.Fast crystallization of full anatomical form zirconia
2.90mm super-diameter tray, full mouth cavity tooth sintering without pressure
3.Pre-drying time can be set to completely dry the denture
4.The maximum temperature can be set to 1550 ℃,suitable for all zirconia
5.Maximum heating rate 200 degrees per minute
6.It is ready to use without preheating in advance.
7.Automatic fast cooling technology
8.Closed silo design, with maximum safety(chair side)
9.Up to 80 teeth can be sintered (90mm tray*2)
10.Variable load design, automatic power regulation of sintering furnace (energy saving)
Related Products
Related Accessories
