Dental Press Furnace

Introduction:

Efficient,Convenient,Fast,Low cost,Compatible with all casting porcelain blocks.

Built in numbers of programme and can be used as a ceramic furnace.

Servo motor driven die casting, constant pressure, no external air source, high success rate

Feature:

BUILT-IN PROGRAM

The common ingot press program is built into the furnace so users can directly use the built-in program, almost without setting it themselves.

RING CRACK DETECTION 

The program can automatically distinguish whether the embedded ring is cracked during the press process of the embedded ring was detect cracked,the press program will automatically reduce the pressure to salvagepress dentures.

REAL TIME DISPLAY

Real time display of press distance and press pressuret is compatible with almostall embedded materials. Including embedded materials with low strength.

TORQUE MOTOR WITH PRESSURE SENSOR

High quality torque motor can freely adjust the press pressure and accurately measure the press distance.

Specification:

OPERATION：

The velocity of temperature increasing: 200℃/min max. (392°F /minute)

The max temperature: 1200℃ max (2283°F)

The time which can be kept at the max temperature: 2H

Vacuum level: 1-101%

ELECTRIC POWER：

Operation range：100-120V 50/60HZ 230V 50/60HZ

Electric current：14.5ampere@110V 7.0ampere@230V

Power：max 1500w

TYPICAL SPECIFICATION：

External Dimension:width 27cm Depth 36cm Height 70cm

Usable measure (firing chamber):：9cm（3.5”）

Net weight：23Kg

Weight include the package:26.5Kg