Pouch Cell Vacuum Sealing Machine For Sealing Aluminum-Laminated Case

This product is mainly used for flexible packaging battery vacuum heat sealing side use, is a small multifunctional vacuum sealing machine. Can be applied to a variety of flexible packaging liquid and solid rechargeable batteries encapsulation process, stand-alone can be achieved soft pack top side sealing, vacuum static, vacuum pre-seal, this machine adopts the time control, and can be used in the argon environment glove box. It is the first choice for battery research laboratory.

Request A Quote Send E-Mail

Product Introduction

1.Introduction:

2.Working Principle:

The vacuum pre-seal machine from the main vacuum pumping box and pneumatic heat sealing vacuum static components, equipment installation and commissioning is convenient, beautiful appearance. Easy to use. Encapsulation of beautiful appearance, tensile one to good.

Technical Parameters:

Power supply:	voltage single-phase 220VAC ± 10% (can be customised 110VAC), frequency 50Hz/60Hz, power 600W
Gas source:	0.5 ~ 0.8MPa compressed air or inert gas
Head temperature:	upper and lower head up to 250 ℃, recommended upper head 200 ℃, lower head 180 ℃ (recommended upper and lower head temperature setting 180 degrees)
Temperature control precision:	±2℃
Sealing cell size:	L200mm * W130mm * H12mm
Sealing width:	standard 5mm
Sealing length:	200mm
Sealing pressure:	through the air pressure adjustment
Heat sealing time:	0~99s adjustable, 3-4s is recommended
Vacuum:	adjustable, the highest to -98Kpa
Gas consumption:	about 0.2L compressed gas/per seal.
Installation size:	the body L470mm * W480mm * H430mm, control box L420mm * W320mm * H220mm
Weight:	about 55Kg for the body, about 18Kg for the control box.