Pouch Cell Heat Vacuum Sealing Machine With Automatic Puncture Function For Final Sealing

This equipment is mainly suitable for the secondary packaging of soft-packed lithium batteries with vacuum and hot-pressure encapsulation after liquid injection and resting.

Request A Quote Send E-Mail

Product Introduction

1.Product Introduction:

This equipment is mainly suitable for the secondary packaging of soft-packed lithium batteries with vacuum and hot-pressure encapsulation after liquid injection and resting.

2.Main Features:

*The head is made of copper material, which has good heat transfer effect to save power consumption and improve working efficiency, and is more energy-saving than similar products;

*The pressure of upper and lower head can be adjusted by regulator to achieve different process parameters;

*The upper and lower heads are driven by pneumatic cylinders and guided by two linear guide bushings, which are flexible in up and down movement and guided accurately to ensure the requirement of parallelism of the products after edge sealing;

*With automatic piercing function;

*The cover cavity is driven by a cylinder and guided by two linear guide bushings, with flexible up and down movement and accurate guiding to ensure the sealing requirement of the product;

*Can be applied to different specifications of the product cell, and the adjustment is simple and convenient;

*Easy to operate, beautiful appearance, small volume, light weight.

3.Technical Parameters

The cavity is made of aluminium alloy:	corrosion-resistant and with solid structure;
Vacuum degree	≤ -98Kpa (the buyer provides its own vacuum pump);
Temperature of head:	room temperature～250℃, temperature adjustable;
Temperature control precision:	±1.5℃;
Heat sealing pressure:	0～7Kg/cm2 adjustable;
Heat sealing time:	0～99 seconds adjustable;
Sealing width:	5mm (according to customer requirements);
Sealing edge size:	200mm;
Sealing head parallelism:	with three carbonless copy paper, sealing head air pressure at 0.6MPa, temperature at 200 ℃ when the sealing seal is pressed out evenly;
Gas consumption:	about 0.2L compressed gas/per seal;
Air pressure working speed:	≥180 times/h;
Power:	500w heat pipe is used, the power consumption when heating is about 1KW;
Power supply:	220V/50Hz;
Compressed air source:	0.5～0.8Mpa;
Equipment external dimensions:	L500mmW500mmH700mm;