Manual Stacking Machine For Pouch Cell Lithium Ion Battery Electrode/Separator Lamination

Applicable to the stacking process of battery cells, Z-stacking of positive and negative electrode sheets and diaphragm.

Request A Quote Send E-Mail

Product Introduction

1.Description：

Applicable to the stacking process of battery cells, Z-stacking of positive and negative electrode sheets and diaphragm.

2.Main Features:

*Desktop type, can be placed on the ordinary desktop;

*Simple and easy to adjust, operate and maintain the machine;

*Applicable to a wide range of core stacking sizes;

*The pole piece is placed manually and the fixture assists in positioning to ensure the neatness of the stacked piece.

*High working efficiency, with digital counter;

*Adopting foot switch to control the cylinder action;

*The machine is small in size and has a delicate and beautiful appearance;

3.Using Method

Load the diaphragm, put it on the stacking table through the swing roller, set the number of stacked sheets, take the negative pole sheet and place it on the stacking table for positioning.

Stack the sheets, press the foot valve, the diaphragm swing roller moves to make the diaphragm cover the negative pole sheet, take the positive pole sheet and put it on the stacking table to position the stacked sheets.

Press the foot valve, the diaphragm swing roller moves to make the diaphragm cover the positive electrode sheet, such as these cycles until the set number of stacked sheets is reached, cut the diaphragm, take out the battery cell, and paste it.

Cut off the diaphragm, take out the battery core and paste the termination tape.

4.Technical Parameters

Maximum Diaphragm Material Roll:	φ250mm
Applicable Specification of Pole Piece:	length (0-200)mm, width (0-200)mm
Swing Roller Travelling Stroke:	400mm
Source:	AC220V/50Hz
Air Pressure Source:	0.5MPa～0.7MPa
Equipment Size:	L650mmW400mmH700mm
Control Box Size:	L200mmW300mmH380mm
Weight:	30Kg