Dual Workstation Single-sided Vacuum Glove box

The dual workstation single sided vacuum glove box is designed for researchers in material science, chemistry, semiconductor, and related topics.

Request A Quote Send E-Mail

Product Introduction

1.Introduction:

The dual workstation single sided vacuum glove box is designed for researchers in material science, chemistry, semiconductor, and related topics.

2.Technical Parameters:

Model

Box size mm

(Length × Width × Height)

Overall size of equipment (mm)

(Length × Width × Height)

Remark

FS-STX-A2

≈1900 × 750 × 900

≈ 2615 × 805 × 1880

One-piece, single-sided 4-glove;

Box material: SUS304 stainless steel, thickness 3mm.

3. Basic Configuration:

Configuration and Quantity	Technical Parameters	Remark
1 set of material transition cabin	Diameter 390mm, length 600mm (The diameter is enlarged to facilitate the placement of items)	Location: right side of the box; Cabin material: SUS304 stainless steel; Door cover material: aluminum alloy; Inside the cabin: There are movable drawers; Door cover opening method: Spin-type closed; Can withstand vacuum degree: <100Pa.
1 set of tool transition cabin	Diameter 150mm, length 360mm (The diameter is enlarged to facilitate the placement of items)	Location: right side of the box; Cabin and door cover material: SUS304 stainless steel; Door cover opening method: snap-on; Can withstand vacuum degree: <100Pa.
1 set of rack	Height 800~900mm, adjustable	Removable and fixable
1 set of shelves	Back-mounted or ceiling-mounted	Double layer, can be removed when not in use to save space
1 transparent visual panel	Material: Double-layer laminated tempered Thickness: 12mm ( thickened )	advantage: If the glass breaks, it will not scatter and injure the materials or operators in the box, and the low-humidity and low-oxygen atmosphere in the box will not be immediately destroyed.
4 gloves	Material: Butyl synthetic rubber Thickness: 0.4mm	Brand: American NORTH Old brand quality assurance
4 glove holes	Material: PPS (polyphenylene sulfide)	Acid and alkali resistant; manufactured using a one-step molding mold.
1 set of power socket	Location: Inside the box Parameters: 220V, 10A, multi-hole	Provide power to the equipment inside the box.
Lighting system 1 set	Brand: Philips	Configure fluorescent tubes or LEDs
3 sets of spare interfaces	KF40, with quick-release connector	Material: SUS304 stainless steel. Installation location: left side of the cabinet or location specified by the customer.
2 HEPA filters	Filtration accuracy 0.3μm	Installed in the box to absorb dust.
2 vacuum gauges	Mechanical dial display Range: -0.1~0MPa	Measure the vacuum degree of the material transition chamber and tool transition chamber.
Pressure gauge 1	Mechanical dial display Range: 0~4000Pa	Measure the box air pressure; When the power is off, the internal pressure of the box can also be measured and displayed.
Pressure sensor 1 piece	-2500～2500Pa (relative pressure)	Touch screen display (automatic protection of the system in case of over-high or under-low pressure).
Foot controller 1 piece	Double pedal type	Controls the gas filling and emptying of the box.
Gas purification system 1 set	Single purification column, model: GP25S (Copper catalyst 7.5 kg, molecular sieve 7.5 kg are all imported materials )	Function: Remove water and oxygen; Installation location: below the material transition cabin or below the box (all-in-one machine); Main internal components: Fan: 90m³/H, Brand: Taiwan Dagang. Solenoid valve (auxiliary valve): G 3/8 , brand: German Boyd.
Control system 1 set	Color touch screen: 7 inches	Touch screen, PLC brand: SIEMENS; The Chinese (including Traditional), English and Russian operating interfaces can be switched freely.
Vacuum pump 1 set Oil mist filter	Model: D16C	Air extraction volume 16m³/H, Brand: Leybold (others optional)
Water probe 1	0～1000ppm Accuracy±2%FS Display accuracy 0.1ppm	Touch screen display, brand: STORK
Oxygen transmitter 1	0～1000ppm Accuracy±2%FS Display accuracy 0.1ppm	Touch screen display, oxygen sensor: American AII fuel cell type ( other German Schutz ZrO 2 type is optional. It is not recommended for R&D projects because it has a large impact on acid and alkali gases, a large offset, and unreliable readings.)
1 set of organic solvent filter	17L	Installed on the glove box pipeline, internal filling: high-efficiency activated carbon.