40KHZ Ultrasonic Metal Welding Machine

Application 1） Polymer battery single layer positive electrode welding 2）Copper tube sealing and cutting 3）Automotive wire harness 4）Solar panel welding 5）Copper, aluminium and other metal welding 6）Battery cap and aluminium bar single point welding 7）Multi-point welding of aluminium strips for battery positive electrode 8）Battery aluminium shell bottom and aluminium-nickel composite strip welding, etc.

Request A Quote Send E-Mail

Product Introduction

1.Application

1） Polymer battery single layer positive electrode welding

2）Copper tube sealing and cutting

3）Automotive wire harness

4）Solar panel welding

5）Copper, aluminium and other metal welding

6）Battery cap and aluminium bar single point welding

7）Multi-point welding of aluminium strips for battery positive electrode

8）Battery aluminium shell bottom and aluminium-nickel composite strip welding, etc.

2.Main Features

1）Precision sliding bearings can ensure the precise movement of the equipment and meet the requirements of the best welding accuracy.

2）Precisely adjustable limit position can accurately determine the up and down position of the welding.

3）The up and down speed of the welding head can be adjusted accurately.

4）Welding time (ultrasonic time) can be precisely adjusted.

5）Hold down time can be adjusted accurately.

6）Power supply box can maintain a stable amplitude output during voltage fluctuations.

7）Unique structural design of the ultrasonic energy transmission to the welding head effectively.

8) Selection of imported SKD11 material, excellent ultrasonic transmission, long-lasting wear-resistant.

9）Overall operation is simple welding efficiency, good welding quality.

3.Specification Parameters

Name	high power metal ultrasonic
Model	FS-40KHz
Power	1000W
Demand power supply	220VAC±10%, 50/60HZ
Requirements for gas pressure	0.4-0.8MPa, humidity is less than 45%, the temperature is not higher than 50°C
Cylinder bore	60mm
Cylinder stroke	10mm
Air consumption	0.0785 cubic metres (1L = 0.001 cubic metres)
Air inlet connector	Quick connector
Welding time	(0.01s-10s) Adjustable
Pre-pressure time	Adjustable (0.02s-1s)
Frequency calculation display	24.5000-25.5000HZ
Frequency auto-tracking	Range ±20HZ
Temperature auto-tracking	Internal power tube 60° auto-protection
EMI/EMC	Strong anti-interference capability
Welding head overall size	about 480L260W245H (mm)
Main chassis overall size	about 500L360W200H (mm)
Total weight	44Kg