2024/11/12 
(1)Release the orifice screw for the first time and place the mold at the center of the press.
(2)Align the wire head with the center of the press bar, rotate the black hand wheel clockwise, and then tighten the silver oil release valve hand wheel at the lower right.
(3)Shake the handle back and forth to reach the pressure we need.
(4)Open the oil stem counterclockwise, and the lab press pressure will relief.
(5)Take out the pressed mold from the tablet press, reverse the mold, and remove the bottom of the mold.
(6)Put the mold set, put the inverted mold into the press again to press the mold and remove the sample.
